Material Overview

PE, PP, PVC, PS, PC, PF, EP, ABS, PA, PMMA, etc. are collectively referred to as plastic materials, also known as polymer materials. They are a type of plastic synthetic materials made from polymer compounds through different processing methods. Plastic materials have the advantages of light weight, high strength, corrosion resistance and good insulation, and are widely used in packaging, construction, automobiles, electronics and other fields.

  • Polyethylene (PE):

It is a lightweight, flexible thermoplastic with good chemical corrosion resistance. According to different densities, it can be divided into high-density polyethylene (HDPE) and low-density polyethylene (LDPE).

  • Polypropylene (PP):

It has high heat resistance, chemical resistance and rigidity, and is a common material for automotive parts and household appliances.

  • Polyvinyl chloride (PVC):

It has good chemical corrosion resistance, mechanical strength and electrical insulation, and is commonly used in pipelines, wires and cables and medical equipment.

  • Polystyrene (PS):

It is a transparent, lightweight plastic with good insulation properties, widely used in disposable tableware and packaging materials.

  • Polycarbonate (PC):

It is known for its excellent transparency, impact resistance and temperature resistance, and is often used to make eyeglass lenses, bulletproof glass and protective covers.

  • Polyoxymethylene (POM):

It is an engineering plastic with high crystallinity, high strength and high rigidity, suitable for making precision parts and gears.

It is a thermosetting plastic with good bonding properties and electrical insulation, widely used in coatings, adhesives and electronic packaging materials.

  • Acrylonitrile-butadiene-styrene (ABS):

It is a common thermoplastic polymer with good mechanical properties and processing properties, and is often used to make toys, automotive parts and electronic equipment housings.

  • Polyamide (PA):

Also known as nylon, it is an engineering plastic with high strength, high toughness and wear resistance, suitable for making bearings, gears and fibers.

  • Polymethyl methacrylate (PMMA):

Commonly known as acrylic, it is a thermoplastic with excellent transparency and strong weather resistance, commonly used in lighting equipment and billboards.

 

  1. PE (Polyethylene)

Physical and chemical properties

Polyethylene (PE) is a linear high molecular polymer with an extremely simple molecular structure composed of repeated “-CH2-CH2-” units. This structure gives PE a variety of unique physical and chemical properties:

  • Lightweight: PE has a low density of approximately 0.91 to 0.96 g/cm³, making it a representative of lightweight materials.
  • Chemical corrosion resistance: PE shows good chemical stability to most acids, alkalis and salt solutions.
  • Electrical insulation: As a non-polar material, PE has excellent electrical insulation properties.
  • Low temperature resistance: PE can maintain its physical properties at temperatures as low as -70°C.
  • Thermoplasticity: PE can be reshaped after heating, which is convenient for recycling and reprocessing.

Processing methods

Polyethylene can be processed in a variety of ways, mainly including the following:

  • Extrusion: used to produce pipes, insulation layers of wires and cables, etc.
  • Injection molding: suitable for manufacturing small containers, toys, etc.
  • Blow molding: used to produce hollow bottles and containers.
  • Compression molding: suitable for manufacturing larger plastic parts.
  • Thermoforming: used to manufacture thin-walled packaging materials and pallets.

Application areas

Polyethylene has a wide range of applications, and the following are some of the main application examples:

  • Packaging materials: PE films are widely used in food packaging and commodity packaging due to their light weight and good protective properties.
  • Plastic pipes: HDPE pipes are often used to transport water and gas due to their chemical corrosion resistance and wear resistance.
  • Wires and cables: PE is widely used in the manufacture of wires and cables as an insulating material.
  • Agriculture: PE is used to manufacture agricultural films, such as mulching technology.
  • Medical field: PE is also used to manufacture certain medical devices due to its biocompatibility and chemical resistance.
  • Automotive industry: PE is used to manufacture automotive parts such as fuel tanks and bumpers due to its light weight and impact resistance.

 

  1. PP (Polypropylene)

Physical and chemical properties

Polypropylene (PP) is a linear thermoplastic made from propylene monomers through polymerization. PP has the following significant physical and chemical properties:

  • Heat resistance: PP has a melting temperature between 160 and 170°C, has good heat resistance, and is suitable for the manufacture of products that need to withstand high temperature environments.
  • Chemical corrosion resistance: PP has good stability to chemicals such as water, inorganic salts, acids and alkalis, but is easily corroded by certain organic solvents.
  • Rigidity: PP has high rigidity, which allows it to maintain its shape when subjected to large loads.
  • Fatigue resistance: PP has good fatigue resistance and is suitable for applications that require repeated bending or twisting.
  • Thermoplasticity: PP can be repeatedly heated and cooled without losing its physical properties, making it easy to recycle.

Processing methods

Polypropylene can be made into different products through a variety of processing techniques:

  • Extrusion: used to produce PP pipes, sheets, rods, etc.
  • Injection molding: suitable for the manufacture of small to medium-sized plastic products such as containers, lids, automotive parts, etc.
  • Blow molding: used to produce large hollow plastic products such as bottles and barrels.
  • Thermoforming: used to make thin-walled plastic packaging containers or pallets.
  • Fiber manufacturing: PP can also be made into fibers through stretching and spinning processes for making ropes, carpets, etc.

Application areas

Polypropylene has a wide range of applications. Here are some of the main application examples:

  • Automotive industry: PP is widely used to make automotive interior and exterior parts such as dashboards, bumpers, etc. due to its light weight and heat resistance.
  • Textile industry: PP fibers are used to make ropes, carpets, clothing, etc.
  • Packaging materials: PP is often used in food and non-food packaging materials due to its light weight and chemical resistance.
  • Household appliances: PP is used to make household appliance parts such as microwave-safe containers and refrigerator drawers.
  • Construction industry: PP pipes and sheets are used in piping systems and decorative materials in buildings.
  • Medical field: PP is also used to make some disposable medical supplies such as syringes and test tubes due to its biocompatibility.

 

  1. PVC (Polyvinyl Chloride)

Physical and Chemical Properties

Polyvinyl chloride (PVC) is a polar non-crystalline thermoplastic formed by the polymerization of vinyl chloride monomer. PVC has the following remarkable physical and chemical properties:

  • Chemical resistance: PVC has high resistance to acids, alkalis and salts, but is easily corroded by certain organic solvents.
  • Mechanical strength: PVC has good mechanical properties, including tensile strength and impact resistance.
  • Electrical insulation: As a non-polar material, PVC has excellent electrical insulation properties.
  • Weather resistance: PVC has good resistance to ultraviolet rays and chemicals in the atmosphere and is suitable for outdoor use.
  • Thermal stability: PVC needs to add heat stabilizers during processing to prevent thermal decomposition.

Processing methods

PVC can be made into different products through a variety of processing techniques:

  • Extrusion: used to produce PVC pipes, door and window frames, cable insulation, etc.
  • Injection molding: suitable for the manufacture of small to medium-sized plastic products, such as toys, electrical appliance housings, etc.
  • Blow molding: used to produce hollow bottles, containers and other large products.
  • Calendering: used to make PVC films and sheets, which are often used in packaging materials and decorative materials.
  • Thermoforming: used to make products with complex geometric shapes, such as automotive parts and building components.

Application areas

The application areas of polyvinyl chloride are very wide, and the following are some major application examples:

  • Construction industry: PVC is widely used in piping systems, window frames and flooring materials in the construction industry.
  • Medical devices: PVC is used to make disposable medical devices such as blood bags and infusion tubes due to its biocompatibility.
  • Automobile industry: PVC is used to make automotive interior parts such as dashboards and door panels.
  • Electronics industry: PVC is used for insulation layers of wires and cables and housings of electronic devices due to its good electrical insulation properties.
  • Packaging materials: PVC films are used for food and non-food packaging due to its good sealing and chemical resistance.
  • Toy manufacturing: PVC is used to make children’s toys and other entertainment products due to its processing performance and cost-effectiveness.
  1. PS (polystyrene)

Physical and chemical properties

Polystyrene (PS) is a thermoplastic known for its transparency, light weight, and ease of processing. PS has the following significant physical and chemical properties:

  • Transparency: PS has good transparency, especially in thinner sheets or containers.
  • Processability: PS is easy to process and can be processed through various methods such as injection molding, extrusion, blister molding, etc.
  • Insulation: As a non-polar material, PS has excellent electrical insulation properties.
  • Impact resistance: PS has good impact resistance at room temperature, but this property will decrease as the temperature decreases.
  • Thermal stability: PS may undergo thermal degradation when exposed to high temperatures for long periods of time, so temperature control is required during processing and use.

processing method

Polystyrene can be processed by:

  • Injection molding: suitable for producing various plastic products with complex shapes, such as toys, container lids, etc.
  • Extrusion: used to produce PS films, sheets, pipes, etc.
  • Blow Molding: Used to make hollow plastic bottles and other containers.
  • Thermoforming: used to produce thin-walled products such as disposable tableware and trays.
  • Compression molding: suitable for producing products with high transparency requirements, such as transparent packaging boxes.

Application areas

Application areas of polystyrene include:

  • Packaging materials: PS is often used to make disposable tableware, food containers, etc. due to its transparency and lightness.
  • Electronic products: PS is used to manufacture casings and components of electronic equipment, such as mobile phone cases, computer accessories, etc.
  • Medical devices: Transparency and chemical resistance make PS suitable for parts of certain medical devices.
  • Construction industry: PS is used to produce insulation materials, decorative panels and other construction products.
  • Toy Manufacturing: PS is widely used in manufacturing children’s toys due to its processability and cost-effectiveness.
  • Optical products: Highly transparent PS is used to manufacture optical products such as spectacle lenses and CD cases.

 

  1. PC (polycarbonate)

Physical and chemical properties

Polycarbonate (PC) is an amorphous thermoplastic with high transparency and excellent mechanical properties. The physical and chemical properties of PC are as follows:

  • Transparency: The light transmittance of PC can reach 90%, making it an ideal material for manufacturing transparent plastic products.
  • Impact resistance: PC has extremely high impact strength and can maintain its impact resistance even at low temperatures.
  • Temperature resistance: The glass transition temperature of PC is around 150°C. It has good short-term heat resistance and is suitable for high temperature environments.
  • Weather resistance: PC has some resistance to UV rays, but may degrade if exposed to sunlight for a long time.
  • Mechanical properties: PC has good tensile strength, flexural strength and compressive strength.

processing method

Polycarbonate can be made into a variety of products using the following processing techniques:

  • Injection molding: suitable for producing precision plastic products, such as eyeglass lenses, mobile phone casings, etc.
  • Extrusion: used to produce PC films, pipes, rods, etc.
  • Thermoforming: Used to make large plastic products such as automotive parts and protective covers.
  • Compression molding: Suitable for manufacturing plastic products with thick walls or complex shapes.
  • Blow molding: Although not commonly used for PC, it is used in some special applications.

Application areas

Polycarbonate has a wide range of applications. Here are some major application examples:

  • Eyewear industry: PC is often used to make safety glasses lenses due to its light weight and impact resistance.
  • Automobile industry: PC is used to manufacture parts such as headlights, taillights and windows of cars.
  • Electronic and electrical appliances: PC is used to manufacture casings and protective covers for electronic equipment such as computers, mobile phones, and televisions.
  • Construction industry: PC sheets are used in building skylights, lighting panels and guardrails.
  • Medical devices: PC’s transparency and chemical resistance make it suitable for manufacturing some medical devices and containers.
  • Safety equipment: PC is used to make bulletproof glass, helmets and other protective equipment.

 

  1. ABS (acrylonitrile-butadiene-styrene)

Physical and chemical properties

Acrylonitrile-butadiene-styrene (ABS) is a common thermoplastic polymer made from the copolymerization of three monomers: acrylonitrile, butadiene and styrene. ABS combines the characteristics of three monomers and has the following significant physical and chemical properties:

  • Comprehensive properties: ABS has good mechanical properties, such as high strength, high toughness and good hardness, making it the material of choice for many applications.
  • Impact resistance: Due to the addition of butadiene, ABS has excellent impact resistance and can maintain this performance even at low temperatures.
  • Processability: ABS is easy to process and can be formed by injection molding, extrusion, thermoforming and other methods.
  • Thermal stability: ABS has good thermal stability during processing, but the long-term use temperature usually does not exceed 80°C.
  • Electrical insulation: As a non-polar material, ABS has good electrical insulation properties.
  • Chemical resistance: ABS has good stability to chemical substances such as water, inorganic salts, acids and alkalis, but is susceptible to corrosion by certain organic solvents.

processing method

There are various processing methods for ABS, mainly including the following:

  • Injection molding: The most commonly used processing method of ABS, suitable for producing various plastic products with complex shapes, such as toys, automobile parts, etc.
  • Extrusion: used to produce ABS pipes, rods, plates, etc.
  • Thermoforming: Used to make large plastic products such as automotive parts and protective covers.
  • Blow molding: Although not commonly used for ABS, it is used in some special applications.
  • Compression molding: suitable for producing products with high transparency requirements, such as transparent packaging boxes.

Application areas

The application fields of ABS are very wide. The following are some main application examples:

  • Automobile industry: ABS is widely used in manufacturing interior and exterior automotive parts, such as instrument panels, bumpers, etc. due to its light weight and impact resistance.
  • Electronic and electrical appliances: ABS is used to manufacture casings and protective covers for electronic equipment such as computers, mobile phones, and televisions.
  • Office equipment: Office equipment such as printers and copiers often use ABS to make outer casings and internal components.
  • Toy Manufacturing: ABS is widely used in manufacturing children’s toys and game consoles due to its processability and cost-effectiveness.
  • Packaging materials: ABS is used to manufacture packaging containers and display racks with certain special requirements.
  • Construction industry: ABS is used to produce insulation materials, decorative panels and other construction products.
  • Medical devices: Transparency and chemical resistance make ABS suitable for certain medical device components.
  1. PA (Polyamide)

Physical and chemical properties

Polyamide (PA), commonly known as nylon, is a synthetic polyamide plastic with excellent physical and chemical properties:

  • High strength and toughness: PA contains amide groups in its molecular chain, which makes it very strong and tough, especially in low temperature environments.
  • Wear resistance: PA has a low friction coefficient and good wear resistance, making it suitable for manufacturing bearings and gears, etc.
  • Chemical corrosion resistance: PA has good resistance to most organic solvents, alkalis and salts, but is susceptible to corrosion by certain acids and oxidants.
  • Thermal stability: PA can be used at higher temperatures, but long-term exposure to high temperatures may cause thermal degradation.
  • Hygroscopicity: PA has a certain hygroscopicity, which may affect its mechanical properties and dimensional stability.

Processing methods

Polyamide can be made into various products through the following processing technologies:

  • Injection molding: Suitable for the production of various plastic products with complex shapes, such as gears, bearings, etc.
  • Extrusion: Used to produce PA pipes, rods, monofilaments, etc.
  • Blow molding: used to make hollow plastic bottles and other containers.
  • Thermoforming: used to produce large plastic products, such as automotive parts and protective covers.
  • Compression molding: suitable for the production of products with high transparency requirements, such as transparent packaging boxes, etc.

Application areas

The application areas of polyamide are very wide, and the following are some major application examples:

  • Automobile industry: PA is widely used to make automotive interior and exterior parts, such as engine parts, door handles, etc., due to its light weight and impact resistance.
  • Electronics and electrical appliances: PA is used to make insulating parts of electrical equipment and housings of electronic equipment.
  • Textile industry: PA fibers are used to make wear-resistant clothing fabrics, carpets and fishing nets, etc.
  • Packaging materials: PA is used to make food packaging and industrial packaging materials, such as food films and heavy-duty packaging bags.
  • Machinery industry: PA is used to make bearings, gears and other mechanical parts because of its wear resistance and self-lubricating properties.
  • Consumer goods: PA is used to make a variety of consumer goods, such as toothbrushes, combs and sporting goods, etc.

 

  1. PMMA (Polymethyl Methacrylate)

Physical and Chemical Properties

Polymethyl methacrylate (PMMA), also known as acrylic, organic glass or acrylic, is a transparent, thermoplastic plastic with high transparency, low price and easy mechanical processing. It is often used as a substitute for glass.

  • Density: The density of PMMA is about 1.15-1.19g/cm³, which is lighter than glass.
  • Mechanical strength: With high relative molecular mass and long-chain polymer structure, PMMA has high strength, and its tensile and impact resistance are 7 to 18 times higher than ordinary glass.
  • Melting point: The melting point of PMMA is low, much lower than about 1000°C of glass.
  • Light transmittance: The light transmittance of PMMA is as high as 92%, which is better than ordinary glass.
  • Chemical stability: PMMA has good resistance to most inorganic acids, alkalis and salts, but is easily corroded by certain organic solvents such as acetone and chloroform.

Processing methods

PMMA can be processed by a variety of methods:

  • Casting: suitable for manufacturing large products, such as bathtubs, large lamps, etc.
  • Injection molding: suitable for mass production of small products, such as toys, small appliances, etc.
  • Machining: can be cut, drilled, etc. by tools such as lathes and drill presses.
  • Thermoforming: suitable for manufacturing products with complex shapes, such as automotive parts, aviation parts, etc.
  • Blow molding, injection, extrusion: suitable for manufacturing pipes, rods, plates, etc.

Application areas

PMMA has a wide range of applications, including:

  • Construction industry: used for building lighting, transparent roofs, sheds, telephone booths, stairs and room wall panels, etc.
  • Automobile industry: used to manufacture car lights, windows, etc.
  • Medical devices: Due to its good transparency and chemical stability, PMMA can be used to manufacture medical equipment and instruments.
  • Optical products: Due to its high light transmittance, PMMA can be used to manufacture eyeglass lenses, optical instruments, etc.
  • Advertising industry: used to make advertising light boxes, signs, signs, etc.
  • Household items: such as decorations, bathroom facilities, handicrafts, etc.
  • Lighting equipment: transparent covers used to make various lamps.

 

  1. Distinguishing methods

Distinguishing different plastic materials can usually be achieved using specific testing methods, such as density testing, infrared spectroscopy, hardness testing, chemical resistance testing, mechanical properties testing and other specific equipment and expertise. There are also some basic methods used to distinguish these common plastic materials:

Appearance and touch

o PE and PP usually appear as translucent white or waxy materials.

o PVC can be hard or soft, hard PVC is usually transparent, soft PVC is opaque, and has good flexibility.

o PS is a colorless and transparent hard material.

o PC is colorless and transparent, with high transparency and impact resistance.

o POM is white or black, with good hardness and strength.

o EP is usually opaque, with good mechanical strength and chemical resistance.

o ABS is usually opaque, with good impact resistance and processing performance.

o PA is translucent, with good toughness and chemical resistance.

o PMMA is highly transparent and is called “plastic glass”.

Burning test

o PE and PP produce paraffin-like droplets when burning, and the flame is blue.

o PVC produces irritating hydrogen chloride gas when burning, and the flame is green.

o PS has thick smoke when burning, and the flame is yellow.

o PC has a yellow flame and fewer droplets when burning.

o POM has a blue flame and a formaldehyde smell when burning.

o EP is not easy to burn, and it produces a special smell when burning.

o ABS produces black smoke and a special smell when burning.

o PA has a blue flame and a faint smell of burning wool.

o PMMA has a blue flame and a strong irritating smell when burning.