High-Force Nitrogen Gas Springs for Demanding Mold Applications
When constant pressure, compact size, and millions of reliable cycles are critical, nitrogen gas springs are the superior solution. Unlike mechanical springs, these sealed units use pre-charged nitrogen to deliver a near-constant force throughout their stroke, making them ideal for lifters, stripper plates, sequential core pulls, and ejection systems in high-performance injection molds. We supply and service leading brands and offer custom solutions to meet your specific mold force requirements.

Product Types & Configurations
1. Standard Cylinder Gas Springs
The most common type, resembling a compact hydraulic cylinder.
Design: A piston rod moving within a cylinder pre-filled with high-pressure nitrogen.
Advantages: Proven design, high force-to-size ratio, reliable long-stroke performance.
Best For: General lifter mechanisms, stripper plate ejection, and core pulls in medium to large molds.
2. Compact / Miniature Gas Springs
Engineered for applications with severe space constraints.
Design: Ultra-small external diameter while maintaining significant force.
Advantages: Fits into tight mold plates or small lifter blocks where traditional springs cannot.
Best For: Small precision molds, intricate lifter systems, and compact core mechanisms.
3. Adjustable-Force Gas Springs
Allows for fine-tuning the spring force after installation and during mold setup.
Design: Features an external adjustment screw or port to vary the internal gas pressure (and thus the output force).
Advantages: Enables optimization of mold kinematics and balancing of forces without disassembly.
Best For: Prototype molds, applications where the required force may need tuning, or multi-cavity mold balancing.
4. Guided / Self-Contained Units
Integrated units with built-in guidance to prevent piston rod rotation or buckling.
Design: May include internal bearings or an external guide housing.
Advantages: Eliminates the need for separate guide posts or bushings, simplifies mold design.
Best For: Applications with high side loads or where precise, straight-line motion is paramount.

Standards, Materials & Leading Brands
Nitrogen gas springs are precision-engineered components built for durability under extreme cyclic loads.
Primary Construction Material: High-strength Chromium Alloy Steel, hardened and precision-ground for wear resistance and to maintain a perfect seal.
Seal Technology: High-performance seals (e.g., polyurethane) compatible with standard mold lubrication systems, designed for low friction and long life.
Common Force Ranges: Available from a few hundred Newtons (N) up to 50,000N or more.
Common Stroke Lengths: Typically from 10mm to over 150mm.
Major Brands We Supply & Support:
Hyson (USA)
Dadco (USA)
Kaller (Germany/Sweden)
Ross (Italy)
MoldMasters (via specific systems)
High-quality compatible equivalents.
Information Required for Ordering (Standard or Custom)
To specify the correct nitrogen gas spring, precise application details are necessary. For custom requirements, please provide the following:
1. Critical Performance Specifications:
Required Force (F): In Newtons (N) or kilonewtons (kN). Specify if initial, final, or constant force is needed.
Stroke Length (S): The required travel distance in millimeters (mm).
Installed Height / Mounting Dimensions: The space available in the mold (height, diameter).
2. Mounting Style:
Threaded Ends (specify male/female and thread size: e.g., M10x1.25).
Flanged Ends.
Through-Hole / Shouldered Ends.
3. Application Details:
What is the spring driving? (e.g., “lifter for an undercut on a side wall,” “primary stripper plate”).
Estimated annual cycles or required service life.
4. Brand Preference or Replacement Need:
If replacing an existing unit, provide the brand and model number (e.g., Hyson 1.0-25).
Clear photos and dimensions of the old unit are extremely helpful.
5. Quantity Required.
Our Technical Support: If you are designing a new system, we can help calculate the required force and recommend the optimal spring type and size.
Why Choose Our Nitrogen Gas Springs?
Reliable Force: Consistent performance over the entire stroke, crucial for complex mold motions.
Long Service Life: Engineered for millions of cycles with minimal force decay.
Space Efficiency: Delivers significantly higher force in a smaller envelope than coil springs.
Expert Support: Assistance with selection, force calculation, and integration into your mold design.
Upgrade your mold’s performance and reliability with precision nitrogen gas springs. Contact us with your specifications or application challenge for a solution and quote.