Technical parameter of servo motor 2500ton injection molding machine
| MODEL:HX(*)2500/41000 | |||||
| TECHNICAL PARAMETER TABLE | A | B | C | ||
| INJECTION UNIT | SCREW DIAMETER | Mm | 170 | 185 | 200 |
| SCREW L/D RATIO | L/D | 23.9 | 22 | 20.3 | |
| INJECTION CAPACITY (THEORETICAL) | Cm3 | 24059 | 28493 | 33300 | |
| INJECTION WEIGHT(PS) | g | 21894 | 25928 | 30303 | |
| Oz | 772.2 | 914.5 | 1068.8 | ||
| INJECTION PRESSURE | MPa | 170 | 144 | 123 | |
| INJECTION RATE | g/s | 1384 | 1551 | 1813 | |
| PLASTICIZING CAPACITY | g/s | 170 | 190 | 220 | |
| SCREW SPEED | rpm | 60 | |||
| CLAMPING UNIT | CLAMP FORCE | KN | 25000 | ||
| OPEN STROKE | mm | 1900 | |||
| MAX. MOULD HEIGHT | mm | 1800 | |||
| MIN. MOULD HEIGHT | mm | 800 | |||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 1850*1700 | |||
| EJECTOR FORCE | KN | 480 | |||
| EJECTOR STROKE | KN | 450 | |||
| EJECTOR NUMBER | n | 17 | |||
| OTHERS | PUMP PRESSURE | MPa | 16 | ||
| MOTOR POWER | KW | 37*4 | |||
| HEATING POWER | KW | 170 | |||
| MACHINE DIMENSION (L×W×H) | m | 18.5*4*5.2 | |||
| MACHINE WEIGHT | t | 170 | |||
| OIL TANK CAPACITY | L | 3700 | |||